/ Unboxing: 
  1. Unbox you M71
    Here you will find:
    -USB cable
    -PSU + Power adapter
  2. Take out the bottom screw off your DelfiScan M71
  3. Insert the included battery into your DelfiScan M71
  4. Insert the bottom screw back
  5. Press the scan button to power ON the scanner
  6. Plug your DelfiScan M71 cradle to the PC using the included USB cable
  7. Plug your DelfiScan M71 Cradle to power using the included PSU ot USB power if an outlet is not available
  8. Dock your DelfiScan M71 into the cradle and let it charge for at least 30 minutes before use

/ Pairing (when using your DelfiScan M71 For the first time you need to pair it with the cradle):

  1. Find the PAIR MODE barcode on the "Pair scanner to base" guide and scan it
    (Find the guide here: support.delfi.com)
  2. After scannering you will hear the DelfiScan M71 Make 3 Ascending Beeps
  3. Dock the DelfiScan M71 into the cradle
    (You will hear one beep and it will start to flash with a small blue light)
  4. After a few seconds the DelfiScanM71 will start to make a ticking soung while the blue light flashes quicker
  5. When paired correctly you will hear 4 ascending beeps and the cradle will light blue