*As default ENTER suffix is loaded into the scanner. *


If you don’t want this ENTER suffix loaded into the scanner meanwhile the ”down” suffix has been loaded, the ENTER suffix needs to be removed before that.

First, download the following guide:


http://download.delfi.com/SupportDL/Delfi/Handheld%20scanners/DelfiScan_M71/Manuals/DelfiScan_M71_Scanner_Reference_Manual_%20Rev_C15.pdf


/ Procedure to remove the ENTER suffix (disable suffix):

  1. Go to page 38
  2. Scan ’Program’
  3. Scan ’Record Suffix’
  4. Scan Option Code ‘0’on page 70
  5. Scan ’FIN (Finish)’ on page 71
  6. Scan ’END’ on the same page

/ Procedure to add suffix, e.g. suffix ”down”:

  1. Go to page 38
  2. Scan ’Program’
  3. Scan ’Postamble’
  4. Go to page 66
  5. Find The ANSI description to the HEX/ANSCII table
  6. *The designation for ”Down” is ’GS’
  7. Find ’GS’ in the HEX/ANSCII table on page 67 (start with the numbers in the upper row)
  8. *’GS’ is 1D
  9. Scan ’1’ and ’D’ on page 70
  10. Scan ’FIN (Finish)’ on page 71
  11. Scan ’END’ on the same page
  12. The ”Down” suffix has now been loaded into the scanner